We making adding your telephone switch or PBX very easy and you could be up
in minutes. Below are the steps.
Step 1: Login to the portal and go to Interconnection -> Host - Add
to add your source IP address
Step 2: Please wait 2-3 minutes so the new IP could propagate to all of
our SBC nodes
Step 3: In order to have full redundancy to all our data centers our
sip.bulkvs.com SRV is recommended to be used. In the event that SRVs
are not supported on your system we have also listed the IPs below.
Please also white list the below IPs on your system.
SIP Proxy / SRV Record: sip.bulkvs.com
Supported Codecs: G.711u, G729a, T.38 (Pass Through where available)
DTMF Support: RFC2833 and Inband(G.711u)
SIP Port: 5060
Step 4: Outbound Calling could be sent in the following format:
-Send calls to 1NXXNXXXXXX@sip.bulkvs.com
-Send calls to NXXNXXXXXX@sip.bulkvs.com
-For Example: Send calls to email@example.com
-For Example: Send calls to firstname.lastname@example.org
-For 911 calls: email@example.com
*For E911 Service, to verify address as currently in 911 DB, call
*For E911 Service, ensure that the Caller ID is set to one of following
10 Digits, ex: 3109060901
11 Digits, ex: 13109060901
11 Digits, ex: +13109060901
Caller ID in any other format will be rejected
If you have any questions please do not hesitate to call
us at 3109060901 or email firstname.lastname@example.org.